Home / News / Panel PC Buying Guide: IP Rating, Temperature Range and Industrial I/O

Panel PC Buying Guide: IP Rating, Temperature Range and Industrial I/O

2026-10-28Product focus8 min read
Panel PC Buying Guide: IP Rating, Temperature Range and Industrial I/O

Many shop-floor workstations now use an industrial panel PC as the human-machine interface. Screen and computer are integrated in one unit, saving mounting space and fitting the floor better than the traditional "monitor plus box PC" arrangement.

But buyers often assume it is close to a commercial tablet, and only discover after installation that it fails quickly. Here are five checks that separate an industrial panel PC from a consumer device.

Check 1: IP rating — the front face needs IP65 or better

Shop floors have dust, coolant splash and operators working with wet hands. The front face of the panel should be at least IP65, fully dust-tight and protected against water jets, so dust and liquid cannot reach the panel and cause shorted pixels.

Commercial tablets are often IP54 or lower. In a workshop they develop touch failures within months as dust gets in.

Check 2: Wide temperature and fanless design for continuous duty

Summer temperatures on a shop floor can exceed 50°C, so the panel should be rated for -10°C~50°C or wider.

Prefer a fully sealed, fanless design: no fan means no dust being drawn in and no fan bearing to wear out, which is what makes 7×24 maintenance-free operation realistic.

Check 3: Industrial I/O — not a consumer tablet with USB only

A panel PC is not for watching video. It connects to PLCs, sensors, barcode scanners and printers, so it needs:

  • RS232/485 serial ports (at least one or two)
  • Gigabit Ethernet (two or more)
  • GPIO digital input/output where required
  • Two to four USB ports for scanners and storage

A consumer tablet offers USB-C only. Connecting serial devices means a dongle and hub, messy cabling on the machine and frequent disconnects — nowhere near industrial reliability.

Check 4: Touch technology that works with gloves

Operators wear protective gloves, and a standard capacitive panel will not register a gloved touch. Specify industrial-grade capacitive or resistive touch so the screen responds accurately through a thick glove without the operator removing it.

If the station is oily or requires a stylus or very thick gloves, resistive touch is often the more practical choice. If multi-touch and display quality matter more, choose industrial capacitive.

Check 5: Mounting that fits the workstation

Panel PCs mount in three common ways:

  • Panel mount: cut an opening in the cabinet face, flush front, most space-efficient
  • VESA mount: wall or bracket, good where the viewing angle must be adjusted
  • Arm mount: swivel and extend, suited to stations beside machine tools

Confirm the available space and cut-out dimensions before ordering so the unit actually fits.

A panel PC is the primary operator interface on the floor. Do not save a few hundred dollars by substituting a consumer tablet: the cost of a line stop caused by a failed panel dwarfs the price difference.

GalaxyTECK supplies industrial panel PCs from 7 to 21 inches, with customised I/O and mounting options. Contact us for a sample evaluation.

Related reading

Need help selecting an industrial computer?

Our engineers review your site conditions and connected equipment, then propose a configuration free of charge.