Current and voltage sensors capture signals from equipment and electrical panels; KTB industrial computers handle acquisition and edge processing before data reaches control systems, SCADA or production data platforms. GalaxyTECK supports model selection against real operating conditions, on-site surveys, installation and commissioning, with six further lines covering energy, environment and consumables.
Or Zalo / call 0389 667 858
From sensing a signal to processing it on the shop floor: these are the two core ranges at GalaxyTECK, selected against each installation point and its operating conditions.
25 models for line control stations, production data acquisition and machine vision: 9 x 4U, 6 x 2U, 2 x 1U rackmount and 8 wallmount. Selected by installation environment, expansion slots and I/O requirements.
6 technology groups - fluxgate, closed-loop, open-loop, ASIC, voltage and leakage current - across 51 series / 180 models. Selected by measuring range, output signal and panel mounting; used for energy metering, load monitoring and signal acquisition for control systems.
Share the models, quantities and installation environment. Our engineers reply within 24 working hours to confirm configuration, lead time and deployment advice. Models added from the 244-item catalog are filled in automatically.
Leave your details and our technical team calls back within 24 working hours.
Submitting online delivers and stores your request; we reply within 24 working hours. Prefer email? galaxyteck6886@gmail.com.
Industrial computers and sensors are the two core ranges; the remaining six cover energy, environment and consumables - all available for one-stop quotation and supply.
Industrial PCs, panel PCs, embedded systems
Current & voltage sensors — 5mA–5000A, Hall & fluxgate
Modules, systems and project supply
HVLS fans, evaporative cooling, exhaust
Flanges, industrial valves, fittings
Sections, tubes, plates and stainless steel
Cleanroom consumables, tools and supplies
Commercial RO, softening, desalination, filters
Every project follows the same workflow, with key conclusions based on on-site measurement.
Clarify conditions, equipment list, constraints and budget range.
Measure temperature, airflow, water quality, power and installation conditions.
Deliver a configuration list and implementation steps - no unsupported figures.
Arrange sourcing and installation around the site production schedule.
Re-measure key parameters and hand over inspection and maintenance guidance.
Designed around real site conditions; configuration and results are based on on-site measurement and re-testing.
Device networking, protocol integration, data collection and edge nodes.
Sub-metering, online energy monitoring, solar and load optimisation.
Spot cooling at heat-source workstations, ventilation and airflow design.
Commercial RO, softening, desalination and online water quality monitoring.
Practical selection methods and implementation experience from project sites, updated regularly.
Industry-typical scenarios; client names are withheld under confidentiality agreements.
Radiation shielding, workstation air supply, HVLS circulation and exhaust working together.
View details
Three-level metering, edge acquisition and platform analysis down to workshop and equipment.
View details
Sized for the worst-case feed water; cartridge replacement driven by operating data.
View detailsThe campus and the SMT smart workshop. Some images are digital renderings for illustration; the actual site prevails.
Rendering
Rendering
Rendering
Rendering
Rendering
No exaggeration, no unsupported figures - only what can be verified on site.
Chinese, Vietnamese and English support, familiar with local site conditions and purchasing practice.
Configuration based on measured data rather than assumptions.
One-stop quotation across eight product lines, fewer interfaces to manage.
Installation, commissioning and ongoing maintenance guidance.
Mainly manufacturing in Vietnam - electronics assembly, metal foundry, food and beverage, plus commercial and industrial support - organised by site conditions.
Yes. We review requirements, run a site survey, then provide a configuration list and implementation steps. We do not promise unverified performance figures at proposal stage.
It depends on category, specification and quantity, and on whether items are stocked or made to order. The schedule is confirmed against the agreed list and current availability.
Yes. Local delivery is supported, and installation and commissioning are scheduled around site conditions and production plans, with inspection and maintenance guidance handed over on completion.
Share your conditions, equipment list and budget range - our engineers will prepare a configuration proposal and implementation advice.