Note:These cases are compiled from typical industry scenarios. Customer names are withheld under commercial confidentiality agreements; equipment quantities shown are typical configuration ranges, and performance descriptions are subject to site survey data and acceptance re-testing, and are not offered as committed values.
Project overview
Industry type
Electronics manufacturing (cleanroom)
Service scope
Anti-static, wiping, protective and cleaning consumables
Delivery method
List consolidation + category coding + safety stock + periodic delivery
Supply content
Trial supply verification, specification alignment, replenishment on demand
Project Background
The enterprise's cleanrooms consume a variety of anti-static and cleanroom consumables on a daily basis, with dispersed categories and frequent withdrawals. The previous approach was for each workshop to request items as needed and purchase them ad hoc, and the problems concentrated on three points: frequent emergency replenishment, inconsistent specifications for the same consumable across workshops, and no data to back up stock levels and consumption.
The project objective was not simply to "sell consumables", but to turn consumables management from passive replenishment into planned supply.
Current Situation and Difficulties
- Disordered categories and specifications: the same type of consumable existed in multiple specifications under multiple names, so purchasing and withdrawal records did not match up, and wrong purchases and wrong withdrawals occurred easily.
- No consumption data: without consumption records by workshop and shift, reasonable stock levels could not be judged, leaving only experience-based hoarding or emergency rescue.
- High cost of emergency purchasing: orders were placed only when stock ran out, so lead times and freight were unattractive and production line scheduling was affected.
- Compliance requirements: cleanrooms impose requirements on cleanliness class, anti-static performance, particle shedding and ionic residue of consumables, so changing suppliers requires verification.
Scheme Design
1. List Consolidation and Category Coding
Consumables were divided into four categories by use scenario and given unified codes:
- Anti-static: anti-static shoes, anti-static garment accessories, grounding-related consumables.
- Wiping and cleaning: cleanroom wipers, cleanroom paper, pre-wetted wiping materials.
- Hand protection: cleanroom gloves, finger cots.
- Environmental cleaning: tacky mats, tacky rollers, cleaning tools.
Each item was given defined specification parameters (dimensions, cleanliness class, surface resistance, material, packaging method), and the codes were aligned with the workshop withdrawal forms to eliminate "one item, many names".
2. Consumption Baseline and Safety Stock
- Withdrawal data was recorded by workshop during the trial supply period to establish a monthly average consumption baseline for each category.
- Safety stock levels and reorder points were set according to consumption variability and replenishment lead time; frequently used categories were kept in permanent stock while long-tail categories were ordered on demand.
- Inventory data is reviewed monthly and adjusted as production volume changes.
3. Delivery Rhythm and Acceptance
- A fixed delivery cycle was set according to workshop demand, reducing the management cost of fragmented withdrawals.
- Incoming goods are accepted against the agreed specifications, with packaging integrity and clean packaging requirements included as inspection items.
- Samples from the trial supply stage are retained for key categories to facilitate later quality traceability.
4. Replacement Verification
New suppliers and new specifications are verified before entering the cleanroom: cleanliness class and anti-static performance checked, actual trial use confirming no particle shedding and no process impact, and differences in handling from the existing consumables explained. Only after verification passes are they added to the formal list.
Typical Configuration (subject to actual demand)
- Anti-static shoes and protective accessories: configured by headcount at the positions and by replacement cycle
- Cleanroom wipers and cleanroom paper: selected by cleanliness class and wiping process, stocked by specification
- Cleanroom gloves and finger cots: material and cleanliness class selected according to process requirements
- Tacky mats and tacky rollers: configured by the number of cleanroom entrances and passages
- Cleaning tools and auxiliary consumables: matched to the workshop cleaning procedures
Implementation Process
- 1On-site inventory check: verify existing consumable categories, specifications, usage locations and monthly consumption, and produce a current-state list.
- 2Code alignment: unify naming and coding, and align them with workshop withdrawal processes and purchasing documents.
- 3Trial supply verification: trial supply of key categories for one month to confirm performance and process suitability.
- 4Set stock lines: set safety stock levels and reorder points based on consumption data from the trial period.
- 5Periodic operation and review: deliver on a fixed rhythm, review consumption and inventory monthly, and adjust as production volume changes.
Results and Verification
- Unified management definitions: one item, one code, with consistent definitions across purchasing, inventory and withdrawal, reducing wrong purchases and wrong withdrawals.
- Shortages under control: frequently used categories are kept in permanent stock at safety levels, and emergency replenishment frequency drops.
- Traceable consumption: withdrawal records by workshop and by category support cost allocation and anomaly investigation.
- Verification records retained: trial supply and acceptance records for key categories serve as a basis for later quality traceability.
Note: the specifications and quantities of specific categories must be determined by the workshop cleanliness class, process requirements and staffing; the actual list is subject to on-site confirmation.
Reusable Lessons
- Unify the codes before talking about inventory: with inconsistent codes, no inventory model can calculate correctly.
- Trial supply is irreplaceable: the actual hand feel, particle shedding and process suitability of cleanroom consumables can only be confirmed by trial use.
- Do not hold stock for long-tail categories: concentrate funds and management effort on high-frequency categories; ordering long-tail items on demand is more economical.
- Review consumption data monthly: changes in production volume and process adjustments both shift the consumption baseline, and a static stock line becomes invalid.
Results and verification
Category standardization
Unified coding across four consumable categories, consistent definitions for purchasing and withdrawal
Inventory under control
Frequently used categories kept at safety stock levels, fewer emergency replenishments
Traceable consumption
Withdrawal records by workshop and category support cost allocation
Replacement verification
New categories added to the formal list only after trial supply and acceptance